Skip to main content
The timeline at the bottom of the editor shows every clip of your video side by side, and when you open Effect, Overlay, or Audio, cards that overlap in time stack onto separate tracks above the clips automatically, so nothing is hidden and you can select, move, split, copy, and reorder each card.

What’s on the timeline?

Each clip is a card with a filmstrip of its video behind the audio waveform and its name on a label at the top left. Clips play back to back in the order shown, and every tool in the left toolbar works across the whole video on this one timeline. The rows above the clip cards depend on the tool you have open:
  • Layout shows a row of layout cards.
  • Effect shows zoom, blur, and highlight cards.
  • Overlay shows media, text, and sticker cards.
  • Audio shows your music and sound effect cards.
Speed, volume, and audio effect sections show as bands on the clip cards themselves. You never assign tracks yourself. Cards that don’t overlap share a track to keep the timeline compact. Drag across an empty part of the timeline to select a time range. The preview follows the moving edge while the red playhead stays parked, then the playhead moves to the selection’s start when you release. A range can run across several clips. To zoom the timeline, use the Timeline zoom slider at the right end of the playbar, press = or -, or hold Cmd on Mac or Ctrl on Windows and scroll.

Right-click a selected range

Right-click a selected range on the timeline, with any tool open, to get the same menu:
  • Cut selection: remove the selected range from the video.
  • Volume and Audio effect: lower the volume of just that range (Mute, 75%, 50%, 25%, or 10%) or add an audio effect to it.
  • Add layout: create a layout section for each selected range, replacing any layouts it covers.
  • Add zoom: add a zoom to the range. Appears only when the clip has a screen recording or media to zoom into.
  • Add blur or Add highlight: add that effect to the range. Appears only when the clip supports them.
  • Add speed: play the range at 1.5×. To change it, click the section and pick a rate from the rate button (for example 1.5×) in the timeline toolbar.
  • Add text, Add media, Add sound effect, or Add music: add that item over the range. Media and sound effects open the library, and the item you pick fills the selected range.
  • Copy to new clip: add the selected content to this video as a separate clip.
  • Copy to new video: create a separate video from the selected content.
When the range runs across several clips, the menu also has Change layout across N clips and Clear selection. Adding something switches you to the tool that edits it: a layout to Layout, a zoom, blur, or highlight to Effect, text or media to Overlay, and a sound effect or music to Audio.
Copy to new clip and Copy to new video use the primary selected range. See Cut and split clips for details.

Move and trim a card

  • Drag the start or end of a card to change how long it lasts.
  • Drag the card left or right to move it earlier or later.
  • Hold Option on Mac or Alt on Windows while dragging to turn snapping off.
Card edges snap to nearby card edges, the playhead, and word boundaries. An alignment guide shows the edge Tella used. While you drag, the start and end of every other card show as faint dashed lines in that card’s color. Turning snapping off hides them.
While you drag a duration handle, the preview follows the moving edge and the red playhead stays parked, so you can pick the exact start or end frame without losing your place.

Select and move several cards

Selected cards move together and keep their timing and spacing:
  1. Hold Cmd on Mac or Ctrl on Windows.
  2. Click cards to add or remove them from the selection, or drag across the timeline to select several cards.
  3. Drag any selected card left or right to move the group.
With Effect open you can select zooms, blurs, and highlights together, and with Overlay open any mix of media, text, and stickers. Press Escape to clear the selection.

Split cards at the playhead

  1. Select a card. To split several at once, select only blur and highlight cards with Effect open, or select any group of cards with Overlay open.
  2. Move the playhead to where you want to cut.
  3. Press X, or right-click a card and select Split at playhead.
Each selected card the playhead sits inside becomes two independently editable cards. Selected cards the playhead is outside are left untouched. If the playhead is not inside any selected card, Tella asks you to move it first. With Overlay open, the whole group stays selected after a split, so you can move the playhead and press X again to split every overlay in the group. Zooms split one at a time. When you split video or audio, the right half continues from the correct point in the source instead of restarting.

Split where you click with the cut tool

With Layout, Effect, Overlay, or Audio open, the scissors button in the timeline toolbar turns on the cut tool (shortcut B). While it’s on, click a clip or a card to split it right where you click. Click the scissors again, or press B or Escape, to turn it off.

Edit a group of overlays

When you select several overlays, changes apply to all of them at once, and each change is a single undo step.
  • Right-click any overlay in the group on the timeline to choose Split at playhead, Send to front, Send to back, Depth, or delete them all. When the group includes sound effects, the menu also offers Mute sound effects or Unmute sound effects.
  • Right-click any overlay in the group on the canvas to choose Send to front, Send to back, or Depth for the whole group.
  • In the sidebar, set Depth and the Animate in and out animations for the whole group. Changing one side of the animation updates only that side, so each overlay keeps its other side. A group that mixes sound effects with other overlays also shows Sound effect volume, which changes only the sound effects. See Add sound effects.
  • On the canvas, the group shows one bounding box with corner handles. Drag a corner to scale every overlay in the group, text included, about the opposite corner.
Depth only appears when the group includes an overlay on a clip with a camera recording. See Put overlays behind the presenter.

Copy and paste groups

With Effect open, zooms can’t be copied together with blurs or highlights; copy them separately.
  1. Select the cards you want to copy.
  2. Press Cmd + C on Mac or Ctrl + C on Windows.
  3. Move the playhead to the destination and press Cmd + V or Ctrl + V.
Pasted cards keep their durations, relative spacing, layer order, and appearance. If the complete group would run past the end of the clip, Tella moves it earlier so every card fits.

Reorder overlays with tracks

With Overlay open, the vertical track order matches how visual overlays stack on the canvas: higher tracks appear in front of lower tracks.
  • Drag a visual overlay card up or down to move it between tracks.
  • Select one visual overlay card and press Arrow Up or Arrow Down to move it by one track.
  • Right-click an overlay on the canvas and choose Send to front or Send to back.
When a visual overlay card is selected in the timeline, plain vertical arrow keys reorder its track instead of moving it by one pixel on the canvas. On a clip with a camera recording, visual overlays can sit behind you. When one does, the Overlay tracks include a dashed Presenter row: cards above it appear in front of you and cards below it appear behind you. Drag a card across the row, or move it with the arrow keys past the row, to change its depth. Send to front and Send to back also change an overlay’s depth when they move it past an overlay on the other side of you. See Put overlays behind the presenter.
Track order only controls what appears in front on the canvas, so it applies only to visual overlays: images, video, text, and stickers. Zooms, blurs, and highlights apply to the footage in the layout’s Screen slot, and sound effects mix together regardless of track. To balance sound effects, use each one’s own volume control.
Last modified on November 19, 2026