Audio and video go out of sync when your microphone and camera deliver to your computer at slightly different speeds, so your voice runs ahead of or behind your mouth. Tella can’t realign audio in the editor, so fix the offset before you record: in the Mac or Windows app, add a delay to your mic under Microphone → Advanced settings in the app settings, then record again.
Why is my audio out of sync?
Audio and video come from two different devices, and your microphone can deliver sound a little faster (or slower) than your camera delivers picture, so the two end up offset. It can happen with:
- USB and webcam microphones: including the mic built into a webcam, or a standalone USB mic.
- A camera used as a webcam: for example a DSLR or mirrorless camera fed in through a capture card, where its audio path is separate from the video.
- XLR microphones: these have a well-known offset; there’s a dedicated guide for them below.
Why does sync get worse over a long recording?
There are two flavors of this problem:
- A constant offset: the audio is off by the same small amount from the first second to the end.
- Drift: the audio and video start roughly aligned but gradually slip further apart the longer you record.
Drift is most common with longer recordings and with setups that combine separate audio and video devices.
Is it the recording or just my download?
Play the same moment on your video’s share page and in the downloaded file:
- If both are out of sync, the offset is part of the recording. Follow the steps below before you record again.
- If the share page is in sync but an older download isn’t, create a fresh export before you re-record. Previously created exports aren’t rebuilt automatically.
To create a fresh export, make a minor edit to the video, then export and download it again. See Re-render a video in Tella for the steps.
Why does my uploaded video play in sync in the editor but not on the share page?
Some uploaded files, such as .mov files from Ecamm Live or videos with B-frames, carry a start delay in the file itself. The editor always applied that delay, but share pages and exports used to ignore it, so the picture played slightly late (by up to about a second) against the audio. Tella now applies it everywhere.
Can I resync audio in the Tella editor?
No. Tella does not have a way to nudge or realign audio against video inside the editor. If a recording came out of sync, correct the offset at the source and re-record.
How do I fix audio sync before recording?
Delay the faster stream so the two line up, then record again. XLR mics are the most common case: their audio typically arrives about 100 ms early.
-
Recording with the Tella Mac app? Open Settings, go to the Recording tab, and click Advanced Settings under Microphone. Turn on Delay audio and set the Amount in milliseconds (0–1000). The delay is saved for the selected microphone. Only add a delay if your audio is ahead of your video.
-
Recording with the Tella Windows app? Open the app settings and, under Microphone, click Advanced settings. Turn on Delay audio and set the Amount in milliseconds (0–1000). The delay is saved for the selected microphone.
-
Using an XLR microphone (like the Shure SM7B) with the web app or Chrome extension? Follow Fix audio sync for XLR microphones, which adds a small delay to the mic and routes it through a virtual microphone you select in Tella.
-
Using a USB mic, webcam, or a camera as a webcam? If the audio is consistently ahead and you record in the Mac or Windows app, use Delay audio as above. Otherwise, close other apps that might be holding the mic or camera, reconnect the device, and record again. If the offset keeps coming back, send us the details below.
What to send us
If you’ve re-recorded and the audio is still out of sync, contact support via the in-app chat or support@tella.com and include:
- A share link to a recording where the desync is visible.
- The microphone and camera you used (for example: webcam mic, USB mic, XLR mic + interface, or a camera via a capture card).
- Whether the audio is ahead of or behind the video.
- Whether it’s constant or drifts further out over the length of the recording.
- Roughly how long the recording is.
Last modified on November 17, 2026