Skip to main content
A layout is where your camera and screen sit on the canvas. Pick one under Layout in the editor’s left toolbar; the presets offered depend on what the clip contains (camera only, screen only, or both). Clips of the same type share one base layout, so changing it in one clip changes it in all of them. To change layouts partway through the video, drag across the timeline and pick a preset for that range.

Why do I see fewer layouts than someone else?

The presets you see depend mostly on what the selected clip contains, not on your plan:
  • Camera-only clips get camera layouts: fullscreen, framed camera shapes such as Circle, Punch-in, and Cut out.
  • Screen-only clips get screen layouts.
  • Screen and camera clips, recorded together in Tella, get the full set that combines both: Camera Bubble, Side-by-side, TV Presenter, Cut out.
  • Uploaded videos get the fewest. Tella receives one combined video track, so it cannot move your camera and screen independently. You can still use Punch-in with a fullscreen layout, add a second visual with a Media layout, or use Cut out to remove the background from uploaded footage of a person.
A colleague who sees more layouts is most likely looking at a clip recorded with both screen and camera. To get those options, record in Tella with both sources on.

Screen and camera layout options

Clips recorded with both screen and camera offer these layouts:
  • Camera Bubble: your camera appears as a small bubble over the screen recording. Choose Cut-out under Camera style to drop the frame and your background while keeping the bubble’s position and size. See Cut out your camera in a Camera Bubble layout.
  • Side-by-Side: splits the frame evenly between your screen recording and camera. In landscape videos the split is horizontal, with a Left/Right control under Customize layout for which side your camera sits on. In portrait and square videos the split is vertical, with a Top/Bottom control for which half your camera sits in. In landscape videos, turn on Perspective in the Side-by-Side panel to tilt the screen in 3D so it recedes toward your camera; turn it off to return to the style you had before.
  • TV Presenter: available for landscape videos, it places your camera prominently with the screen floating alongside it. The “Full” variants fill the entire canvas with your camera while the screen floats on top.
  • Cut out: removes your camera background so only you appear, standing beside your screen recording. In landscape videos, the Perspective switch angles the screen toward you while you stand in front of it. Camera-only clips have a Cut out preset too, which places you over your video’s background. See Remove your camera background with Cut out.
  • Screen-only / Camera-only: show a single source full-frame. For a screen-dominant look, use Camera Bubble and set Camera size to S.

Choose a layout

1. Open your video in Tella. 2. Click Layout in the left toolbar. The layout picker opens with a Presets tab listing the available layouts for the type of clip (camera-only, screen-only, or screen and camera). If you have saved layouts, they appear under Favorites. 3. Select a preset. The Layout panel header also includes:
  • The current canvas size, which you can click to switch ratios.
  • Adjust, where you can crop your camera or screen, mirror your camera, change clip transitions and the layout animation style without changing zoom animation, and preview social safe zones for 9:16 videos. Press A to open this panel directly.

Punch in on an uploaded video

For a clip whose only footage is an uploaded video, Layout labels that footage Video rather than Screen. You can punch in without adding a screen zoom:
  1. Select the uploaded clip and open Layout.
  2. Choose the fullscreen preset (Full) under Video.
  3. Turn on Punch-in in the layout controls.
Punch-in enlarges the footage to 1.15× and fills the canvas, cropping the edges instead of leaving letterbox bars. The Fill / Fit control is hidden while Punch-in is on; turn it off to use that control again. This toggle is for uploaded footage, not screen recordings. To zoom into part of a screen recording, use the Effect tool instead.

Apply the same layout to every clip

Every clip has a base layout. It fills the gaps between the layout sections you add to the timeline. Clips of the same type (for example, every screen-and-camera clip) share one base layout, so it’s already the same on all of them: change it once and every clip of that type follows. 1. Click Layout in the left toolbar. 2. Click a gap in the layout row above the clips. The gaps of every clip that shares this base layout are selected together, and Tella shows how many clips use it. 3. Choose a preset. It shows a Base badge, meaning you’re changing the default rather than one layout section. Layout sections you added stay in place. To give one clip a different layout, drag across that clip on the timeline and choose a preset: Tella adds a layout section over it and leaves the shared base layout alone.

Screen looks cropped or zoomed to one side: Fill vs. Fit

With a fullscreen layout or the Full Camera Bubble variant, the screen fit control sets how your screen recording fits the canvas.
  • Fill: scales your screen recording to fill the entire canvas area. If the screen’s aspect ratio differs from the canvas, the edges are cropped. This is the default.
  • Fit: scales your screen recording to fit entirely within the canvas without cropping. If the aspect ratios don’t match, you’ll see bars (letterboxing).
To switch between Fill and Fit: 1. Move the playhead into a clip that includes a screen recording. 2. Click Layout in the left toolbar. 3. Choose a fullscreen layout or the Full Camera Bubble variant. 4. Open Customize layout and use the Fill / Fit toggle next to the screen fit control.
Use Fit when content near the edges must stay visible, such as code editors or dashboards.
The screen fit setting persists when you change canvas size or switch between landscape, portrait, and square orientations.
With Auto canvas size, Tella hides the screen fit control on the layout that sets the canvas size because Fill and Fit look the same there. On any other fullscreen or Full Camera Bubble layout in the clip, the control stays available, so you can choose Fit there.

Make your camera smaller (or larger)

Shrink your camera bubble; you don’t need a re-record. Zoom won’t do it: zoom punches in on screen content, not your camera. 1. Open your video and click Layout in the left toolbar. 2. Choose a Camera Bubble layout. 3. Open Customize layout and use Camera size to choose S, M, or L. Choose S to make yourself as small as possible. For a size between the presets, drag the camera’s corner handles on the canvas. This turns it into a custom layout that you can save to your Favorites.

Position your camera bubble

Camera Bubble layouts have a 3×3 position grid for nine camera positions: four corners, four edges, and the center. TV Presenter layouts use a simpler left/right position control. 1. Open Layout and choose a Camera Bubble layout. 2. Open Customize layout and use the 3×3 grid to pick where your camera should appear. The full grid and size selector work for landscape, portrait, and square orientations.

Customize a layout

You can move, resize, and fine-tune the elements of any preset. 1. After choosing a preset, open Customize layout from the Layout panel to access the layout’s controls (style, variants, camera position and size, screen fit, and more). 2. Drag the camera or screen recording on the canvas to adjust the composition. 3. Use Mirror camera in the camera controls, or right-click your camera and choose Flip horizontally, to flip your camera. Open the ⋯ menu beside Camera, Screen, or Video (uploaded footage) to crop that source without leaving Layout. 4. Tella then shows that you’re using a custom layout instead of a preset. You can save this arrangement to your Favorites to reuse it across videos. See Saved layouts for the full workflow.

Work with the layout timeline

When the Layout panel is open, the timeline shows a row of layout cards above every clip of the video, with each clip’s waveform and transcript underneath and a time ruler on top. Each card is a layout section; the gaps between cards use the base layout. Move around
  • Scroll to pan along the video.
  • Hold Cmd on Mac or Ctrl on Windows and scroll to zoom in and out, centered on your pointer. Shift + scroll over the timeline zooms too.
  • Use the zoom slider next to the timeline, or press = and -.
  • Hover over the waveform or transcript to preview that frame before you click.
Select what you want to change
  • Click a section to select it.
  • Drag across the timeline to select a time range. The preview follows the moving edge while the red playhead stays parked, then the playhead moves to the selection’s start when you release.
  • Hold Shift and drag to add more ranges, so you can change several places at once.
  • Hold Cmd on Mac or Ctrl on Windows and click sections to select them individually, or drag to sweep across several.
  • Click a word in the transcript row to select it, or drag across words to select a phrase.
  • Press Escape to clear explicit ranges and multi-selected cards. The layout under the parked playhead can become active again immediately.
Adjust a section
  • Drag a section to move it, or drag its edge to resize it.
  • Sections snap to word boundaries, other sections, and the playhead. Hold Option on Mac or Alt on Windows while dragging to turn snapping off.
  • Where two sections touch, the shared edge becomes a seam. Drag the seam to move the boundary between them with both sections staying joined, or hold Option/Alt and drag to pull them apart and open a gap.
When you drag a section edge or seam, the video previews that moving boundary while the red playhead stays parked.
For precise timing, click a section’s edge or a seam, then press the left or right arrow key. Each press moves it by one pixel at your current timeline zoom. Hold Shift while pressing an arrow key to move it by 10 pixels.
Right-click for more The menu depends on what’s under your pointer:
  • On a layout section: Customize layout and Delete layout. If the section contains media, you also get options to trim, mute, adjust the volume of, replace, or remove it.
  • On a base-layout gap: Customize layout, plus the media options when the base layout shows media.
  • On a selected range: the same menu as every other tool: Cut selection, Volume, Add layout, Add zoom, Add blur, Add highlight, Add speed, Add text, Add media, Add sound effect, Add music, Copy to new clip, and Copy to new video. Zoom, blur, and highlight appear only when the clip is compatible. Adding something switches you to the tool that edits it. See Right-click a selected range.

Reset all layouts

To remove every added layout section and custom layout adjustment from every clip of the video, open More actions (⋯) in the Layout toolbar and choose Reset all layouts, then click Reset all to confirm. Click Undo in the confirmation message to restore them.

Use multiple layouts in one clip

Add several layouts to one clip to change the visual focus at specific moments. See Multiple layouts for a shorter walkthrough. To add a layout section: 1. Drag across the time range you want to change, or select the matching words in the transcript. 2. Choose a preset. Tella creates a layout card for that range. 3. Move the card or drag its edges to fine-tune the timing. You can also place the playhead and click Add layout. Without a selected range, Tella creates a short section using your last non-base layout. Hold Cmd on Mac or Ctrl on Windows to change the action to Add until end.

Apply a layout in multiple places

You can select several timeline ranges or existing layout sections and update them together.
  1. Open the Layout panel.
  2. Select every place you want to change:
    • To select time ranges, drag across the first range. Then hold Shift while dragging each additional range.
    • To select existing layout sections, hold Cmd on Mac or Ctrl on Windows while clicking each section. You can also hold the same key and drag across several sections.
  3. Choose a layout preset. Tella applies it to every eligible selected range and every selected section.
New sections created from eligible selected ranges stay selected as a group, so another layout pick updates the same group. Undo or redo treats the whole change as one action. If you move or resize a selected range, undo restores both its timing and the selection you started with.
Selected ranges shorter than 0.2 seconds are skipped. Other eligible ranges and selected layout sections are still updated. If nothing can be updated, regular layout presets show a warning; Media layouts don’t create a section.
To create sections with a non-base layout before choosing another preset, click Add layout. Tella creates one layout section for each eligible range, usually using the last non-base layout you chose.

Split a layout at the playhead

You can split a layout section in two. 1. Select the layout section you want to divide. 2. Move the playhead to the point where you want the split. 3. Press X. The section is divided at the playhead and the new right half stays selected, so you can immediately apply a different layout to it. Nothing happens when no section is selected or when the playhead is outside the selected section. To split where you click instead, click Split (the scissors) in the Layout toolbar, or press B, then click the layout card at the point you want to split. Press Escape or click the scissors again to stop.

Delete a layout section

Select a layout section in the timeline, then click Delete in the Layout toolbar or press Delete or Backspace on your keyboard. To remove several layout sections at once, hold Cmd on Mac or Ctrl on Windows while selecting them, then delete the selection. Your video always needs a base layout, so you can’t delete the base section. If you drag across the timeline to select a time range instead of selecting a layout section, Delete remains disabled and your footage stays unchanged. Open the Cut tool when you want to remove part of the video.

Copy, cut, and paste layout sections

You can reuse one or more layout sections elsewhere in your video without rebuilding them.
  1. Select a layout section in the timeline. To select several sections, hold Cmd on Mac or Ctrl on Windows while clicking each one. You can also drag across a time range to include the layout sections it overlaps.
  2. Press Cmd/Ctrl + C to copy the selection, or Cmd/Ctrl + X to cut it.
  3. Move the playhead to where you want the copied sections to start.
  4. Press Cmd/Ctrl + V to paste.
Tella keeps each section’s duration and the spacing between selected sections. Layout styling and any media in those sections are copied too, including media framing and volume settings.
If the copied group would run past the end of the target clip, Tella moves the group earlier so it fits. If the group is longer than the clip, Tella shows a warning and does not paste it.

Adjust transitions between layouts

Whenever you add multiple layouts to a clip, Tella automatically inserts a smooth transition between them. To change how a selected layout starts and ends: 1. Select a non-base layout card. 2. Open Customize layout. 3. Under Animations, set Intro and Outro to Smooth or Hard cut. The first layout has no editable Intro, and the last layout has no editable Outro. Use the ⋯ menu beside Animations to Set as default for future layout sections, or Apply to all transitions in the current clip.

When to use one layout or multiple layouts

  • Use single layouts if your content stays consistent throughout the clip (e.g., a straightforward screen recording or a talking-head video).
  • Use multiple layouts to switch focus within the same clip (e.g., between a detailed screen view and your camera).
For longer videos, you can also combine multiple clips, each with its own layouts.
Last modified on November 19, 2026